Deutsch
English
| Title | Author | Journal | No. | DOI/ISBN | |
| Oxygen and aluminum tracer diffusion in (-201) oriented ß-Ga2O3 single crystals | J. Uhlendorf, H. Schmidt | Phys. Rev. Mater. | 7 | 10.1103/PhysRevMaterials.7.093402 | |
| Lithium-Ion Diffusion in Near-Stoichiometric Polycrystalline and Monocrystalline LiCoO2 | D. Uxa, E. Hüger, K. Meyer, L. Dörrer, H. Schmidt | Chem. Mater. | 35 | 10.1021/acs.chemmater.3c00359 | |
| Hydrogen diffusion in proton-exchanged congruent lithium niobate during post-annealing | Kofahl, L. Dörrer, H. Fritze, H. Schmidt, | Solid State Ionics | 403 | 10.1016/j.ssi.2023.116383 | |
| Increase of electrode life in resistance spot welding of aluminum alloys by the combination of surface patterning and thin-film diffusion barriers | S. Brechelt, H. Wiche, J. Junge, R. Gustus, H. Schmidt V. Wesling | Weld. World | 67 | 10.1007/s40194-023-01614-3 | |
| Analysis of the diffusion in a multilayer structure under a constant heating rate: the calculation of activation energy from in-situ neutron reflectometry measurement | F. Yang, H. Schmidt, E. Hüger | ACS Omaga | 8 | 10.1021/acsomega.3c04029 | |
| Activation energy of diffusion determined from a single in-situ neutron reflectometry experiment | E. Hüger, J. Stahn, H. Schmidt | Mater. Res. Lett. | 11 | 10.1080/21663831.2022.2114814 | |
| Li Self-Diffusion and Ion Conductivity in Congruent LiNbO3 and LiTaO3 Single Crystals | C. Kofahl, L. Dörrer, B. Muscutt, S. Sanna, S. Hurskyy, U. Yakhnevych, Y. Suhak, H. Fritze, S. Ganschow, H. Schmidt, | Phys. Rev. Mater. | 7 | 10.1103/PhysRevMaterials.7.033403 | |
| In-situ Neutron Reflectometry to Determine Ge Self-Diffusivities and Activation Energy of Diffusion in Amorphous Ge0.8Si0.2 | E. Hüger, J. Stahn, H. Schmidt | EPJ Web. Conf. | 286 | 10.1051/epjconf/202328605002 | |
| Lithium Niobate for Fast Cycling in Li-ion Batteries: Review and New Experimental Results, Batteries | E. Hüger, L. Riedel, J. Zhu, J. Stahn, P. Heitjans, H. Schmidt | Batteries | 9 | 10.3390/batteries9050244 | |
| Increasing the level of resistance spot welding of aluminium alloys by electrode modification, Part 2: Welding characterization | S. Brechelt, H. Wiche, J. Junge, R. Gustus, H. Schmidt, V. Wesling | Bullet. Mater. Res. Engin. | 12 | ||
| Increasing the level of resistance spot welding of aluminum alloys by electrode modification, Part 1: Diffusion barrier coatings | J. Junge, S. Brechelt, H. Wiche, V. Wesling, H, Schmidt | Bullet. Mater. Res. Engin. | 12 | ||
| Review and Stress Analysis on the Lithiation Onset of Amorphous Silicon Films | K. Zhang, E. Hüger,Y. Li, H. Schmidt, F. Yang | Batteries | 9 | 10.3390/batteries9020105 | |
| Evaluation of the effectiveness and performance of environmental impact assessment studies in Greece | Iliana Papamichael, Foteini Tsiolaki, Marinos Stylianou, Irene Voukkali, Georgia Sourkouni, Nikolaos Argirusis, Christos Argirusis, Antonis A. Zorpas | Comptes Rendus Chimie | 12 January | doi.org/10.5802/crchim.218 | |
| Study of PLA pre-treatment, enzymatic and model-compost degradation, and valorization of degradation products to bacterial nanocellulose | Georgia Sourkouni, Sanja Jeremić, Charalampia Kalogirou, Oliver Höfft, Marija Nenadovic, Vukasin Jankovic, Divya Rajasekaran, Pavlos Pandis, Ramesh Padamati, Jasmina Nikodinovic-Runic, Christos Argirusis | World Journal of Microbiology and Biotechnology | 39(161) | doi.org/10.1007/s11274-023-03605-4 | |
| Study on the Degradation of SOFC Anodes Induced by Chemical and Electrochemical Sintering Using EIS and µ-CT | Georgia Sourkouni and Christos Argirusis | Applied Sciences | 13 | doi.org/10.3390/app132312785 | |
| Assessing the Time Dependence of AOPs on the Surface Properties of Polylactic Acid | Charalampia Kalogirou, Oliver Höfft, Anna Gödde, Nikolaos Papadimitriou, Pavlos K. Pandis, Christos Argirusis, Georgia Sourkouni | Journal of Polymers and the Environment | 31 | doi.org/10.1007/s10924-022-02608-w | |
| Fast reactive interdiffusion between solid brass and liquid aluminum | Vanessa Glück Nardi, Thomas Greß, Babette Tonn, Harald Schmidt, Wolfram Volk | Results in Materials | 20 | doi.org/10.1016/j.rinma.2023.100471 | |
| Invited: Investigation of Carbon/Copper Multilayer to Examine the Influence of Copper Coating on the Li-Storage Performance of Carbon | Erwin Hüger, Chao Jin, Kevin Meyer, Daniel Uxa, Fuqian Yang | Energies | 16 | doi.org/10.3390/en16062740 | |
| Characterization of Molecular Interactions in the Bondline of Composites from Plasma-Treated Aluminum and Wood | Sascha Jan Zimmermann, Philipp Moritz, Oliver Höfft, Lienhard Wegewitz, Wolfgang Maus-Friedrichs, Sebastian Dahle | Molecules | 28 (22) | doi.org/10.3390/molecules28227574 | |
| Influence of different processing atmospheres on curing and adhesive strength of cyanoacrylates | Philipp Moritz, Sandra Gerland, Lienhard Wegewitz, Annika Raatz, Wolfgang Maus-Friedrichs | International Journal of Adhesion and Adhesives | 124 | doi.org/10.1016/j.ijadhadh.2023.103386 | |
| Interaction of Cyanoacrylate with Metal Oxide Surfaces (Cu, Al) | Philipp Moritz, Oliver Höfft, Lienhard Wegewitz, Wolfgang Maus-Friedrichs | ChemPhysChem | 24 (10) | doi.org/10.1002/cphc.202300076 | |
| Interaction of cyanoacrylates with copper oxide in different process atmospheres | Philipp Moritz, Lienhard Wegewitz, Wolfgang Maus-Friedrichs | Proceedings of the 5th Materials Technology Symposium | 12 | 978-3-8440-9105-2 | |
| Influence of structuring the electrode working surfaces by means of particle beams during resistance spot welding of aluminum alloys | Brechelt, S.; Wiche, H.; Wesling, V. | Progress reports of materials research and materials technology | Volume: 11 | 978-3-8440-9090-1 | |
| Increasing the amount of stand in resistance spot welding of aluminum alloys, Part 1: Diffusion barrier coatings | Junge, J.; Brechelt, S.; Wiche, H.; Wesling, V.; Schmidt, H. | Progress reports of materials research and materials technology | Volume: 12 | 978-3-8440-9105-2 | |
| Increasing the amount of stand in Resistance spot welding of aluminium alloys, Part 2: Welding technology Characterization | Brechelt, S.; Wiche, H.; Junge, J; Gustus, R.; Schmidt, H.; Wesling, V. | Progress reports of materials research and materials technology | Volume: 12 | 978-3-8440-9105-2 | |
| Increase of electrode life in resistance spot welding of aluminum alloys by the combination of surface patterning and thin-film diffusion barriers | Brechelt, S.; Wiche, H.; Junge, J.; Gustus, R.; Schmidt, H.; Wesling, V. | Welding in the World | 67 | 10.1007/s40194-023-01614-3 | |
| Increasing the electrode level in resistance spot welding of aluminum alloys by use of electrode modifications | Brechelt, S.; Junge, J.; Wiche, H.; Schmidt, H.; Wesling, V. | DVS Reports | Pending | Pending | |
| Super-resolution Reflection Microscopy via Absorbance Modulation | Jain, P., Geisler, C., Leitz, D., Udachin, V., Nagorny, S., Weingartz, T., Adams, J., Schmidt, A., Rembe, C. & Egner, A. | ACS Nanoscience Au | 3 | 10.1021/acsnanoscienceau.3c00013 | |
| Atmospheric Non-thermal Plasma Reduction of Natively Oxidized Iron Surfaces | Udachin, V., Wegewitz, L., Szafarska, M., Dahle, S., Gustus, R., & Maus-Friedrichs, W. | Plasma Chemistry and Plasma Processing | 43 | 10.1007/s11090-023-10346-7 | |
| Reduction of metal surface oxides using an atmospheric dielectric barrier discharge plasma and investigation of deoxidation mechanisms (Talk and publication) | Udachin, V., Dahle, S., Maus-Friedrichs, W. | Clausthaler Zentrum für Materialtechnik (ed.): Proceedings of the 4th Symposium on Materials Technology. Düren: Shaker Verlag. | 978-3-8440-9105-2 | ||
| Atmospheric Non-thermal Plasma Reduction of Natively Oxidized Iron Surfaces, Plasma Chemistry and Plasma Processing | Udachin, V., Wegewitz, L., Szafarska, M., Dahle, S., Gustus, R., Maus-Friedrichs, W. | Plasma Chemistry and Plasma Processing | 43 | 10.1007/s11090-023-10346-7 | |
| Gas Phase Reaction of Silane with Water at Different Temperatures and Supported by Plasma | Szafarska, M., Olszok, V., Holländer, U., Gustus, R., Weber, A. P., Maus-Friedrichs, W. | ACS Omega | 8 | 10.1021/acsomega.2c07209 | |
| Pressing and Sintering of Titanium Aluminide Powder after Ball Milling in Silane-Doped Atmosphere | Behrens, B.-A., Brunotte, K., Peddinghaus, J., Ursinus, J., Döring, S., Maus-Friedrichs, W., Gustus, R., Szafarska, M. | Journal of Manufacturing and Materials Processing | 7 | 10.3390/jmmp7050171 | |
| Potentials and properties of arc spraying in silane-doped inert gases | Rodriguez Diaz, M., Szafarska, M., Gustus, R., Möhwald, K., Maier, H. J. | Proceedings 4 . Symposium Materials Technology | 10.21268/20230711-3 | ||
| Investigation of the reactivity of gaseous silane and water at different temperatures | Szafarska, M., Gustus, R., Maus-Friedrichs, W., Olszok, V., Weber, A. P. | Proceedings 4 . Symposium Materials Technology | ISBN: 978-3-8440-9105-2 | ||
| Influence of nitrogen-doped shielding gas for welding of medium manganese austenites for cryogenic applications | Philipp Neef, Christoph Reppin, Kai Treutler, Andreas Gericke, Knuth-Michael Henkel, Volker Wesling | Welding in the World | 10.1007/s40194-023-01656-7 | ||
| Welding processing and qualification of medium-manganese austenitic steels for cryogenic applications | Christoph Reppin, Andreas Gericke, Knuth-Michael Henkel, Philipp Neef, Kai Treutler, Volker Wesling | Large welding conference | |||
| Additive multimaterial 3D-structures | Robert Bernhard, Philipp Neef, Joerg Hermsdorf, Henning Wiche, Stefan Kaierle, Volker Wesling | Laser 3D Manufacturing X | 10.1117/12.2648277 | ||
| Welding processing and qualification of medium manganese austenitic steels for cryogenic applications | Philipp Neef, Kai Treutler, Volker Wesling, Christoph Reppin, Andreas Gericke, Knuth-Michael Henkel, | 5th Materials Technology Symposium | 10.21268/20230711-8 | ||
| Title | Author | Journal | No. | DOI/ISBN |
| The Lithiation Onset of Amorphous Silicon Thin-Film Electrodes | E. Hüger, D. Uxa, F. Yang, H. Schmidt | Appl. Phys. Lett. | 221 | 10.1063/5.0109610 |
| Electrochemical investigation of ion beam sputter deposited carbon thin films for Li-ion batteries | E. Hüger, C. Jin, H. Schmidt | J. Appl. Electrochem. | 52 | 10.1007/s10800-022-01737-3 |
| C-Rate Capability of Ion-Beam Sputter Deposited Silicon, Carbon and Silicon/Carbon Multilayer Thin Films for Li-Ion Batteries | E. Hüger, C. Jin, D. Uxa, H. Schmidt | J. Electrochem. Soc. | 169 | 10.1149/1945-7111/ac8a79 |
| Tracer Diffusion in Proton-Exchanged Congruent LiNbO3 Crystals as a Function of Hydrogen Content | L. Dörrer, R. Heller, H. Schmidt | Phys. Chem. Phys. Chem. | 24 | 10.1039/D2CP01818G |
| Lithium Tracer Diffusion in Near Stoichiometric LiNi0.5Mn1.5O4 Cathode Material for Lithium-ion Batteries | D. Uxa, H. Schmidt | Z. Phys. Chem. | 236 | 10.1515/zpch-2021-3098 |
| Research progress in transition metal oxide based bifunctional electrocatalysts for aqueous electrically rechargeable zinc-air batteries | Maria Mechili, Christos Vaitsis, Nikolaos Argirusis, Pavlos K. Pandis, Georgia Sourkouni, Christos Argirusis | Renewable and Sustainable Energy Reviews | 156 | doi.org/10.1016/j.rser.2021.111970 |
| End-of-Life of Composite Materials in the Framework of the Circular Economy | Georgia Chatziparaskeva, Iliana Papamichael, Irene Voukkali, Pantelitsa Loizia, Georgia Sourkouni, Christos Argirusis, and Antonis A. Zorpas | Microplastics | 1 | doi.org/10.3390/microplastics1030028 |
| Sonochemical synthesis of zinc adipate Metal-Organic Framework (MOF) for the electrochemical reduction of CO2: MOF and circular economy potential | Christos Vaitsis, Eirini Kanellou, Pavlos K. Pandis, Iliana Papamichael, Georgia Sourkouni, Antonis A. Zorpas, Christos Argirusis | Sustainable Chemistry and Pharmacy | 29 | doi.org/10.1016/j.scp.2022.100786 |
| Research Progress in Metal-Organic Framework Based Nanomaterials Applied in Battery Cathodes | Maria Mechili, Christos Vaitsis, Nikolaos Argirusis, Pavlos K. Pandis, Georgia Sourkouni, Antonis A. Zorpas, and Christos Argirusis | Energies | 15 | doi.org/10.3390/en15155460 |
| Organic Waste Substrates for Bioenergy Production via Microbial Fuel Cells: A Key Point Review | Maria G. Savvidou, Pavlos K. Pandis, Diomi Mamma, Georgia Sourkouni, and Christos Argirusis | Energies | 15 | doi.org/10.3390/en15155616 |
| End-of-Life Management and Recycling on PV Solar Energy Production | Iliana Papamichael, Irene Voukkali, Mejdi Jeguirim, Nikolaos Argirusis, Salah Jellali, Georgia Sourkouni, Christos Argirusis, and Antonis A. Zorpas | Energies | 15 | doi.org/10.3390/en15176430 |
| Dielectric barrier discharge plasma deoxidation of copper surfaces in an Ar/SiH4 atmosphere | Udachin, V., Wegewitz, L., Dahle, S., & Maus-Friedrichs, W. | Plasma Chemistry and Plasma Processing | 42 | 10.1007/s11090-022-10268-w |
| Reduction of copper surface oxide using a sub-atmospheric dielectric barrier discharge plasma | Udachin, V., Wegewitz, L., Dahle, S., & Maus-Friedrichs, W. | Applied Surface Science | 573 | 10.1016/j.apsusc.2021.151568 |
| Dielectric Barrier Discharge Plasma Deoxidation of Copper and Iron Surfaces (Poster and publication) | Udachin, V., Dahle, S., & Maus-Friedrichs, W. | 2022 IEEE International Conference on Plasma Science (ICOPS) | 10.1109/ICOPS45751.2022.9813324 | |
| Oxide Free Wire Arc Sprayed Coatings-An Avenue to Enhanced Adhesive Tensile Strength | Rodriguez Diaz, M., Szafarska, M., Gustus, R., Möhwald, K., Maier, H. J. | Metals | 12 | 10.3390/met12040684 |
| Young's Modulus and Residual Stresses of Oxide-Free Wire Arc Sprayed Copper Coatings | Rodriguez Diaz, M., Raumel, S., Wurz, M. C., Szafarska, M., Gustus, R., Möhwald, K., Maier, H. J. | Coatings | 12 | 10.3390/coatings12101482 |
| Laser beam brazing of aluminum alloys in XHV-adequate atmosphere with surface deoxidation by ns-pulsed laser radiation | Aman, W., Nothdurft, S., Hermsdorf, J., Kaierle, S., Szafarska, M., Gustus, R., Overmeyer, L. | Journal of Laser Applications | 34 | 10.2351/7.0000574 |
| Influence of an oxygen-free atmosphere on laser beam brazing of aluminium with prior surface deoxidation by pulsed laser radiation | Aman, W., Nothdurft, S., Hermsdorf, J., Kaierle, S., Szafarska, M., Gustus, R., Maus-Friedrichs, W., Overmeyer, L. | Procedia CIRP | 111 | 10.1016/j.procir.2022.08.122 |
| Potentials of thermal spraying processes in silane-doped inert gases | Rodriguez Diaz, M., Szafarska, M., Nicolaus, M., Möhwald, K., Maier, H. J. | International Thermal Spray Conference and Exhibition (ITSC) | 10.31399/asm.cp.itsc2022p0199 | |
| Molybdenum Copper MMC for Additive Manufacturing of Thermal and Structural Components | Philipp Neef, Robert Bernhard, Henning Wiche, Volker Wesling | Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK) | 10.1007/978-3-030-96501-3_4 | |
| Additive Manufacturing of Optical, Thermal and Structural Components by Laser Metal Deposition | Robert Bernhard, Philipp Neef, Christian Hoff, Joerg Hermsdorf, Stefan Kaierle, Henning Wiche, Volker Wesling | Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK) | 10.1007/978-3-030-96501-3_5 | |
| Title | Author | Journal | No. | DOI/ISBN |
| Development of an intelligent process monitoring and control system for laser cladding of multi-material joints | Bernhard, R.; Neef, P.; Wiche, H.; Wesling, V. | Proceedings of the 4th Materials Technology Symposium | ||
| Laser Cladding - Additive Manufacturing | Bernhard, Robert; Neef, Philipp; Wiche, Henning; Wesling, Volker; Hoff, Christian; Hermsdorf, Jörg; Kaierle, Stefan | 10.1007/978-3-030-53195-9_1 | ||
| Use of AI methods for geometry detection in MSG welding | Bratzel, D.; Wittek, S.; Rausch, A.; Treutler, K.; Gehling, T.; Wesling, V. | Proceedings of the 4th Materials Technology Symposium | ||
| Investigation of wear on the upper edges of webs of thin-film coated single-screw extruders processing pure polymers | Buttler, Torben; Hamje, Jens; Reiter, Rolf; Wesling, Volker | MP (Materials Testing) | 2 | 10.1515/mt-2020-0021 |
| Surface finishing of hard-to-machine cladding alloys for highlystressed components | D. Schroepfer, K. Treutler, A. Boerner, R. Gustus, T. Kannengiesser, V. Wesling, W. Maus-Friedrichs | The International Journal of Advanced Manufacturing Technology | 114 | |
| Synthesis, Powder-Metallurgical Production and Lithium Tracer Diffusion in LiNi0.33Mn0.33Co0.33O2 Cathode Material for Lithium-Ion Batteries | D. Uxa, H. J. Holmes, L. Dörrer, H. Schmidt | Proceedings, 4th Symposium Materials Technology | 10.21268/20210518-2 | |
| Lithium Tracer Diffusion in Near Stoichiometric LiNi0.5Mn1.5O4 Cathode Material for Lithium-ion Batteries | D. Uxa, H. Schmidt | Journal of Physical Chemistry | doi.org/10.1515/zpch-2021-3098 | |
| Fundamental experiments on the measurement of Li diffusion in electrochemically lithiated silicon electrodes for lithium-ion batteries | E. Hüger, H. Schmidt | Proceedings, 4th Symposium Materials Technology | 10.21268/20210518-2 | |
| Development of surface coatings for high-strength low alloy steel filler wires and their effect on the weld metal microstructure and properties | Gehling, T.; Treutler, K.; Wesling, V. | Weld World (Welding in the World) | 10.1007/s40194-021-01086-3 | |
| Combination of clinching with laser beam welding - influence of parameter and material variation on static joint properties | Koch, C.; Nothdurft, S.; Hermsdorf, H.; Kaierle, S.; Wiche, H.; Wesling, V. | Welding and cutting | 44593 | |
| Proton exchange at LiNbO3 surfaces - diffusion investigations | L. Dörrer, H. Schmidt | Proceedings, 4th Symposium Materials Technology | 10.21268/20210518-2 | |
| Lithium tracer diffusion in proton-exchanged lithium niobate | L. Dörrer, P. Tuchel, D. Uxa, H. Schmidt | Solid State Ionics | 365 | doi.org/10.1016/j.ssi.2021.115657 |
| Hydrogen diffusion in proton-exchanged lithium niobate single crystals | L. Dörrer, P. Tuchel, E. Hüger, R. Heller, H. Schmidt | Journal of Applied Physics | 129 | doi.org/10.1063/5.0047606 |
| Use of copper-molybdenum pseudo-alloys for laser-based additive manufacturing of multi-material interconnects | Neef, P.; Bernhard, R.; Wiche, H.; Wesling, V. | Proceedings of the 4th Materials Technology Symposium | ||
| Bonding mechanism of Cyanoacrylate on SiO2 and Au: Spectroscopic Studies of the Interface | P. Moritz, F. Bürger, O. Höfft, L. Wegewitz, W. Maus-Friedrichs | Journal of Physical Chemistry, Part C | 125 | doi.org/10.1021/acs.jpcc.1c06477 |
| Oxygen-free transport of samples in silane-doped inert gas atmospheres for surface analysis | R.Gustus, M. Szafarska, and W.Maus-Friedrichs | Journal of Vacuum Science & Technology B | 39 | doi.org/10.1116/6.0001180 |
| Superhydrophilic Coating of Pine Wood by Plasma Functionalization of Self-Assembled Polystyrene Spheres | S. Dahle, J. Meuthen, R. Gustus, A. Prowald, W. Viöl, W. Maus-Friedrichs | Coatings | 11(2) | |
| Silver nanoparticle formation on lignin and ist precursors | S. Dahle, L. Wegewitz, W. Viöl, W. Maus-Friedrichs | Les/Wood | 70 | doi.org/10.26614/les-wood.2021.v70n01a03 |
| Switchable mesomeric betaines derived from pyridinium phenolates and bis(thienyl)ethane | S. Nagorny, F. Lederle, V. Udachin, T. Weingartz, E. G. Hübner, S. Dahle, W. Maus-Friedrichs, J. Adams, and A. Schmidt | European Journal of Organic Chemistry | 22 | |
| Measurement and control in the WAAM process | Scheck, M.; Franz, J.; Richter, Andreas; Rembe, Christian; Bohn, C.; Gehling, T.; Wesling, V. | Proceedings of the 4th Materials Technology Symposium | ||
| Requirements for path planning algorithms for WAAM processes | Stromberg, H.; Lohrengel, A.; Ehlers, R.; Hamje, J.; Wesling, V. | Proceedings 4th Symposium Materials Engineering | ||
| Beneficial use of hyperbaric process conditions for welding of aluminum and copper alloys | Treutler, K.; Brechelt, S.; Wiche, H.; Wesling, V. | Weld World (Welding in the World) | 10.1007/s40194-021-01088-1 | |
| Reduction of copper surface oxide using a sub-atmospheric dielectric barrier discharge plasma | V. Udachin, L. Wegewitz, S. Dahle, W. Maus-Friedrichs | Applied Surface Science | 573 | doi.org/10.1016/j.apsusc.2021.151568 |
| Material properties of additively manufactured structures | Wesling, V.; Leicher, M.; Gräbner, M.; Treutler, K.; Lorenz, S.; Esderts, A.; Hupka, Moritz; Wächter, Michael; Spitzer, K.-H. | Proceedings of the 4th Materials Technology Symposium | ||
| Novel thermally assisted clinching process for the production of punctual metal-plastic joints | Wesling, V.; Wiche, H.; Koch, C.; Beyer, R.; Pilgrim, R.; Unger, F.; Heinemann, M.; Stolz, E.; Awiszus, B.; Binotsch, C.; Gerstmann, T. | Proceedings of the 4th Materials Technology Symposium |
| Monotonic and Fatigue Properties of Steel Material Manufactured by Wire Arc Additive Manufacturing | Wächter, Michael; Leicher, Marcel; Hupka, Moritz; Leistner, Chris; Masendorf, Lukas; Treutler, Kai; Kamper, Swenja; Esderts, Alfons; Wesling, Volker; Hartmann, Stefan | Applied Sciences | 15 | 10.3390/app10155238 |
| Li Diffusion in Thin Film LiySi Electrodes: Galvanostatic Intermittent Titration Technique and Tracer Diffusion Experiments | D. Uxa, E. Hüger, H. Schmidt | Journal of Physical Chemistry C | 124 | doi.org/10.1021/acs.jpcc.0c08294 |
| Lithium silicon compounds as electrode material for lithium-ion batteries | D. Uxa, E. Hüger, L. Dörrer, H. Schmidt | Journal of the Electrochemical Society | 167 | 10.1149/1945-7111/abb9cc |
| Surface deoxidation mechanism during vacuum heat treatment of stainless steels AISI 304 and 446 | Cornelia Strauß, Lienhard Wegewitz, Simon Schöler, Ulrich Holländer, Kai Möhwald, Wolfgang Maus-Friedrichs | Steel research international | 91 | doi.org/10.1002/srin.201900568 |
| Towards Dry Machining of Titanium-Based Alloys: A New Approach Using an Oxygen-Free Environment | H.J. Maier, S. Herbst, B. Denkena, M.-A. Dittrich, F. Schaper, S. Worpenberg, R. Gustus, W. Maus-Friedrichs | Metals | 10 (9) | doi.org/10.3390/met10091161 |
| Lytic Polysaccharide Monooxygenase-Assisted Preparation of Oxidized-Cellulose Nanocrystals with a High Carboxyl Content from the Tunic of Marine Invertebrate Ciona intestinalis | A. Karnaouri, B. Jalvo, P. Moritz, L. Matsakas, U. Rova, O. Höfft, G. Sourkouni, W. Maus-Friedrichs, A. P. Mathew, P. Christakopoulos | ACS Sustainable Chem. Eng. | 8 | doi.org/10.1021/acssuschemeng.0c05036 |
| Preparation techniques of thin cyanoacrylate adhesive films for interface analysis | P. Moritz, F. Bürger, L. Wegewitz, W. Maus-Friedrichs | The Journal of Adhesion | doi.org/10.1080/00218464.2020.1866557 | |
| X-ray diffraction and secondary ion mass spectrometry investigations of GaN films grown on (0 0 1) and (1 1 0) MgF2 substrates by plasma-assisted molecular beam epitaxy PA-MBE) | K. Meyer, M. Buchholz, D. Uxa, L. Dörrer, H. Schmidt, D. M. Schaadt | Materials Science in Semiconductor Processing | 119 | DOI: 10.1016/j.mssp.2020.105262 |
| Volume Expansion of Amorphous Silicon Electrodes during Potentiostatic Lithiation of Li-Ion Batteries | H. Schmidt, B. Jerliu, E. Hüger, J. Stahn | Electrochemistry Communications | 115 | doi.org/10.1016/j.elecom.2020.106738 |
| Lithium Diffusion in Ion-Beam Sputter-Deposited Lithium-Silicon Layers | F. Strauß, E. Hüger, J. Julin, F. Munnik, H. Schmidt | Journal of Physical Chemistry C | 124 | doi.org/10.1021/acs.jpcc.0c01244 |
| Investigation of the influence of heat treatment of cold work steel on coating adhesion under mechanical load between substrate and thin titanium coatings deposited by PVD | Buttler, Torben; Reiter, Rolf; Wesling, Volker | MP (Materials Testing) | 6 | 10.3139/120.111520 |
| Multi-material design A31:G41in additive manufacturing-feasibility validation | Leicher, M.; Kamper, S.; Treutler, K.; Wesling, V. | Weld World (Welding in the World) | 8 | 10.1007/s40194-020-00887-2 |
| In-Operando Neutron Reflectometry Studies on Lithium Insertion into Silicon Electrodes of Li-Ion Batteries | B. Jerliu, E. Hüger, L. Dörrer, H. Schmidt | Bulletin Materials Research Engineering | 7 | 10.21268/20190312-2 |
| Influences on the corrosion resistance of additively manufactured components | Bick, T.; Kamper, S.; Treutler, K.; Wesling, V.; Stromberg, H.; Lohrengel, A. | Materials and components on the test bench | ||
| Additive manufacturing of corrosion-resistant structures | Bick, T.; Treutler, K.; Wesling, V. | DVS Reports Volume 357 | ||
| Resonance properties of quartz crystal microbalance immersed in high solid content suspensions | Botha, J.A.; Hunter, T.N.; Johannsmann, D.; Austin, D.; Hodges, C.S.; Mackay, G.A.; Woodburgy, S.E.; Biggs, S.; Harbottle, D. | Colloids and Surfaces a Physicochemical and Engineering Aspects | 573 | |
| Hyperbaric welding of aluminum alloys | Brechelt, S.; Wiche, H.; Treutler, K.; Wesling, V. | DVS Reports Volume 357 | ||
| Pre-pulse utilization in resistance spot welding of multi-section joints with additional use of adhesives | Brechelt, S.; Wiche, H.; Wesling, V. | DVS Reports Volume 356 | ||
| Influence of pre-pulse in spot weld bonding of three-sheet steel stack-up | Brechelt, S.; Wiche, H.; Wesling, V. | Weld World (Welding in the World) | 10.1007/s40194-019-00706-3 | |
| Time behavior and influencing variables of applied adhesive layers between multi-section joining partners during resistance spot welding | Brechelt, S.; Wiche, H.; Wesling, V. | Progress reports on materials research and materials technology | ||
| Influence of atmosphere during vacuum heat treatment of stainless steels AISI 304 and 446 | Cornelia Strauß, René Gustus, Wolfgang Maus-Friedrichs, Simon Schöler, Ulrich Holländer, Kai Möhwald | Journal of Materials Processing Technology | 264 | https://doi.org/10.1016/j.jmatprotec.2018.08.038 |
| On the Lithiation Mechanism of Amorphous Silicon Electrodes in Li-Ion Batteries | D. Uxa, B. Jerilu, E. Hüger, L. Dörrer, M. Horisberger, J. Stahn, H. Schmidt | Journal of Physical Chemistry C | 123 | doi.org/10.1021/acs.jpcc.9b06011 |
| Increasing the usable fatigue strength of welds by FE modeling of the exact load application. | Deinböck, A., Wächter, M., Esderts, A., Hesse, A., Hensel, J. | 37th Simulation Conference | ||
| Increasing the permissible fatigue strength of weld seams by considering different load introductions. | Deinböck, A., Wächter, M., Esderts, A., Hesse, A., Hensel, J., Dilger, K. | Christ, H.-J. (Ed.): Materials and components on the test bench : testing technology - determination of characteristic values - damage prevention | ISBN: 9783883554181 | |
| Increased accuracy through consideration of the statistical size effect within the notch stress concept | Deinböck, A., Wächter, M., Hesse, A., Hensel, J., Esderts, A. | IIW document XIII-2792-19 | ||
| Neutron Reflectometry to Measure in-situ the Rate Determining Step of Lithium Ion Transport through Thin Silicon Layers and Interfaces | E. Hüger, J. Stahn, P. Heitjans, H. Schmidt | Physical Chemistry Chemical Physics | 21 | doi.org/10.1039/c9cp01222b |
| Lithium diffusion in amorphous LixSi (x ≤ 0.4) materials | F. Strauss, H. Schmidt | Defect and Diffusion Forum | 391 | doi.org/10.4028/www.scientific.net/DDF.391.88 |
| Diffusion in amorphous LixSi thin films as electrode material for lithium-ion batteries: influence of oxygen content | F. Strauß, H. Schmidt | Bulletin Materials Research Engineering | 7 | 10.21268/20190312-2 |
| Influence of coated MSG welding wire electrodes on the weld strength of ultra-high-strength fine-grained structural steels | Gehling, T.; Treutler, K.; Wesling, V. | DVS Reports Volume 356 | ||
| Thin-film coating of MSG welding wire electrodes - Weld metal and process properties | Gehling, T.; Treutler, K.; Wesling, V. | DVS Reports Volume 357 | ||
| Targeted influence on the weld strength of high-strength fine-grain structural steels in the GMA welding process through functionalized weld material surfaces | Gehling, T.; Treutler, K.; Wesling, V. | Weld World (Welding in the World) | 3 | 10.1007/s40194-019-00707-2 |
| Application of a hybrid test specimen for the design of rotor encapsulation in automotive e-machines | Gundlach, C., Hartwig, S., Mannig, M., Menzel, M., Lück, P., Dilger, K. | Plastics in Automotive Engineering, VDI PIAE, Mannheim, April 03/04, 2019 | ||
| Influence of weld geometry on notch stress distribution and stress con-centration factors | Hesse, A., Hensel, J., Deinböck, A., Wächter, M., Dilger, K. | IIW document XIII-2793-19 | ||
| Investigations into clinching with combined resistance heating | Koch, C.; Wiche, H.; Wesling, V. | DVS Reports Volume 342 | ||
| Wire and Arc Additive Manufacturing of Aluminum Components | Köhler, K., Fiebig, S., Hensel, J., Dilger, K. | Metals | 9(5), 608 | doi:10.3390/met9050608 |
| Effects of Thermal Cycling on Wire and Arc Additive Manufacturing of Aluminum Components | Köhler, M., Hensel, J., Dilger, K. | IIW - International Institute of Welding | I-1409-19 | - |
| Feasibility validation of multimaterial construction methods in additive manufacturing | Leicher, M.; Treutler, K.; Kamper, S.; Wesling, V. | DVS Reports Volume 355 | ||
| Multi-material design in additive manufacturing - validation of feasibility | Leicher, M.; Treutler, K.; Kamper, S.; Wesling, V. | Progress reports on materials research and materials technology | ||
| Residual stresses and microstructural morphology of additively manufactured components under the influence of different interlayer temperatures | Leicher, M.; Treutler, K.; Wächter, Michael; Esderts, A.; Wesling, V. | Materials and components on the test bench | ||
| Aging investigation of intrinsic hybrid compounds. In: Clausthal Center for Materials Technology | Lippky, K., Mund, M., Hartwig, S., Dilger, K. | Proceedings NSM2019 | DOI: 10.21268/20190318-10 | |
| Polymer induced metal diffusion during plastic processing: a reason for deposit formation | Maria Sonnenberg, Rene Gustus, Sascha Sedelmeier, Oliver Höfft, Jürgen Wieser, Wolfgang Maus-Friedrichs | Journal of Polymer Engineering | 39 | https://doi.org/10.1515/polyeng-2018-0324 |
| Influence of production based surface topography and release agent amount on bonding properties of CFRP | Mund, M., Lippky, K., Blass, D., Dilger, K. | Composite Structures | DOI: 10.1016/j.compstruct.2019.02.026 | |
| Generative manufacturing of optical, thermal and structural components for laser systems | Neef, P.; Bernhard, R.; Wiche, H.; Wesling, V.; Kranert, F.; Budde, J.; Wienke, A.; Neumann, J.; Kracht, D.; Lammers, M.; Ahlers, H.; Grabe, T.; Rettschlag, K.; Lachmayer, R. | Progress reports on materials research and materials technology | ||
| Determination of the shear modulus of Thin Polymer Films with a Quartz Crystal Microbalance | Petri, J.; Johannsmann, D. | Analytical Chemistry | 91, (2) | |
| Reactivity of urethanes at high temperture: Transurethanization and side reactions | Prenveille, T.; Garreau, C.; Matner, M.; Dijkstra, D.; Opermann, W.; Johannsmann, D. | Journal of Polymer Science Part a-Polymer Chemistry | 57 , (5) | |
| Echtzeittemperaturmessung bei additivem Lichtbogenschweißen / Real-time temperature measurement at wire arc additive welding | Richter, Andreas; Rembe, Christian; Gehling, Tobias; Treutler, Kai; Wesling, Volker | tm - Technical measurement | S1 | 10.1515/teme-2019-0057 |
| Latex films with gradients in crosslink density created by small-molecule-based auto-stratification | Römermann, H.; Johannsmann, D. | European Physical Journal E | 42, (2) | |
| Use of APTMS-HMDSO mixtures in PECVD processes | Schneider, H., Hartwig, S., Dilger, K., Schütz, C. | Proceedings NSM2019 | ||
| Impact of notch geometry on dynamic strength of materials | Stael von Holstein, J.; Bick, T.; Treutler, K.; Wesling, V. | Materials Testing | 9 | |
| Gaseous "nonoprobes" for detecting gas-trapping environments in macroscopic films of vapor-deposited amorphous ice. | Talewar, S. K.; Halukeerthi, S. O.; Riedlaicher, R.; Shephard, J. J.; Clout, A. E.; Rosu-Finsen, A.; Williams, G.R.; Langhoff, A.; Johannsmann, D.; Salzmann, C.G. | Journal of Chemical Physics | 151, (13) | |
| FE mesh generation of porous beam welds in aluminum materials based on computed tomographic volume data | Teichmann, F., Hensel, J., Dilger, K. | Lecture | ||
| Structural FE-Analysis of porous laser welded aluminum die castings based on x-ray computed tomography data | Teichmann, F., Ziemer, A., Leitner, M., Hensel, J., Dilger, K. | Lecture | ||
| Effect of geometric notches on the dynamic material properties of steels | Treutler, K.; Engelking, L.; Grass, F.; Kamper, S.; Wesling, V. | DVS Reports Volume 342 | ||
| Multi-Material Design in Welding Arc Additive Manufacturing | Treutler, K.; Kamper, S.; Leicher, M.; Bick, T.; Wesling, V. | Metals | 7 | |
| Fatigue strength parameters for components additively manufactured in the WAAM process | Wächter, Michael; Hupka, Moritz; Masendorf, Lukas; Treutler, K.; Leicher, M.; Kamper, S.; Esderts, A.; Wesling, V. | Materials and components on the test bench | ||
| Characterization of hybrid composite-metal structures - determination of a test method | Wehbe, H., Kandula, M., Hartwig, S., Dilger, K. | Proceedings NSM2019 | ||
| Design influence of additively manufactured components on wear protection | Wesling, V.; Hamje, J.; Leicher, M.; Bick, T.; Kamper, S. | Materials and components on the test bench | ||
| Improved adhesion of a-C and a-C:H films with a CrC interlayer on 16MnCr5 by HiPIMS-pretreatment | Wolfgang Tillmann, Nelson Filipe Lopes Dias, Dominic Stangier, Wolfgang Maus-Friedrichs, René Gustus, Carl Arne Thomann, Henning Moldenhauer, Jörg Debus | Surface & Coatings Technology | 375 | https://doi.org/10.1016/j.surfcoat.2019.07.076 |
| Investigation of the Electrode/Ionic Liquid Interphase: Chemical Reactions of an Ionic Liquid and a Lithium Salt with Lithiated Graphite Probed by X-ray Photoelectron Spectroscopy | Zhen Liu, Guozhu Li, Andriy Borodin, Xiaoxu Liu, Yao Li, Frank Endres | The Journal of Physical Chemistry C | 123 (16) | doi.org/10.1021/acs.jpcc.8b11549 |
| In situ X-ray photoelectron spectroscopy investigation of the solid electrolyte interphase in a Li/Li6.4Ga0.2La3Zr2O12/LiFePO4 all-solid-state battery | Zhen Liu, Guozhu Li, Andriy Borodin, Xiaoxu Liu, Yao Li, Frank Endres | Journal of Solid State Electrochemistry | 23 (7) | doi.org/10.1007/s10008-019-04296-4 |
| Lithium Insertion into Silicon Electrodes Studied by Cyclic Voltammetry and Operando Neutron Reflectometry | B. Jerliu, E. Hüger, L. Dörrer, B.-K.Seidlhofer, R. Steitz, M. Horisberger, H. Schmidt | Physical Chemistry Chemical Physics | 20 | 10.1039/C8CP03540G |
| Strategies for welding asymmetric sheet metal combinations with adhesive applications using resistance spot welding | Brechelt, S.; Wiche, H.; Wesling, V. | Resistance welding and alternative processes | ||
| Influence of the highly stressed length on the notch stress strength of weld seams | Deinböck, A., Wächter, M., Esderts, A., Hesse, A., Hensel, J. | Conference Materials Testing 2018. Materials and components on the test bench. December 6 and 7, 2018, Bad Neuenahr, Steel Institute VDEh | ISBN: 978-3-941269-99-6 | |
| In-situ Measurement of Self-Atomic Diffusion in Solids Using Amorphous Germanium as a Model System | E. Hüger, F. Strauß, J. Stahn, J. Deubener, M. Bruns, H. Schmidt | Scientific Reports | 8 | 10.1038/s41598-018-35915-1 |
| Li Permeability Increase in Nano-Sized Amorphous Silicon Layers | E. Hüger, H. Schmidt | Journal of Physical Chemistry C | 122 | doi.org/10.1021/acs.jpcc.8b09719 |
| Permeation, solubility, diffusion and segregation of lithium in amorphous silicon layers | E. Hüger, L. Dörrer, H. Schmidt | Chemistry of Materials | 30 | 10.1021/acs.chemmater.8b00186 |
| Lithium Tracer Diffusion in Amorphous LixSi for Low Li Concentrations | F. Strauß, L. Dörrer, M.Bruns, H. Schmidt | Journal of Physical Chemistry C | 122 | doi.org/10.1021/acs.jpcc.7b1229 |
| A specimen for evaluation potting materials in functional integrated design solutions | Gundlach, C., Hartwig, S., Mannig, M., Menzel, M., Smatt. T., Dilger, K. | Proceedings 3rd Hybrid Materials and Structures | ||
| Multi-pulse utilization in resistance spot welding of steels - effects on the welding areas with different electrode degeneration | Kerl, H.; Wiche, H.; Wesling, V.; Koch, C. | Report volume Clausthal Center for Materials Technology | ||
| Brazing production of novel fiber-reinforced semi-finished steel products | Koch, C.; Wiche, H.; Wesling, V. | DVS Reports Volume 339 | ||
| Investigations into clinching with combined material joining | Koch, C.; Wiche, H.; Wesling, V. | Report volume Clausthal Center for Materials Technology | ||
| Ultrasound assisted synthesis of Ag-decorated TiO2 active in visible light | M. Stucchi, C.L. Bianchi, C. Argirusis, V. Pifferi, B. Neppolian, G. Cerrato, D.C. Boffito | Ultrasonics - Sonochemistry | 40 | dx.doi.org/10.1016/j.ultsonch.2017.07.016 |
| Adsorption study of thin films of terephthalic acid and substituted benzoic acids on HOPG studied by Metastable Induced Electron Spectroscopy and Ultraviolet Photoelectron Spectroscopy | Marcel Marschewski, Harun Taş, Christian Otto, Wolfgang Maus-Friedrichs, Andreas Schmidt and Oliver Höfft | Journal of Electron Spectroscopy and Related Phenomena | 229 | https://doi.org/10.1016/j.elspec.2018.09.002 |
| Influence of internal release agent content on bonding properties of fiber reinforced plastics | Mund, M., Lippky, K., Blass, D., Dilger, K. | Conference Proceedings Adhesion Society Annual Meeting 2018 | ||
| Characterization and applications of nanoparticles modified in-flight silica or silica-organic coatings | Patrick Post, Lisa Wurlitzer, Wolfgang Maus-Friedrichs, Alfred Weber | Nanomaterials | 8 | https://doi.org/10.3390/nano8070530 |
| Formation of metal (nano-)particles in drying latex films by means of a reducing plasma: a route to auto-stratification | Römermann, H.; Müller, A.; Bomhardt, K.; Hofft, O.; Bellmann, M.; Viol, W.; Johannsmann, D. | Journal of Physics D-Applied Physics | 51, (21) | |
| Film Formation of Pressure-Sensitive Adhesives (PSAs) Studied with Forster Resonance Energy Transfer (FRET) and Scattering Intensity | Wahdat, H.; Hirth, C.; Johannsmann, D.; Gerst, M.; Ruckel, M.; Adams, J. | Macromolecules | 51, (12) | |
| Extracting a characteristic value concerning metal-composite-hybrids - identification of the relevant testing method | Wehbe, H., Blass, D., Dilger, K. | The Journal of Adhesion | DOI: 10.1080/00218464.2018.1562346 | |
| Influence on the weld strength of high-strength fine-grained structural steels by thin-film-coated GMA welding electrodes | Wesling, V.; Treutler, K.; Gehling, T. | IOP Conference Series: Materials Science and Engineering | ||
| The Influence of Pre-Pulse Process on the Weld Nugget Formation of Multilayer Structures with Adhesive Applications | Wesling, V.; Wiche, H.; Brechelt, S. | Report volume Clausthal Center for Materials Technology | ||
| Creation of material-bonded joints on solid aluminum parts and galvanized sheet steel using hybrid composite forging | Wesling, V.; Wiche, H.; Treutler, K.; Bick, T.; Langner, J.; Kriwall, M. | DVS Reports Volume 344 | ||
| An Ionic Liquid-Surface Functionalized Polystyrene Spheres Hybrid Electrolyte for Rechargeable Zinc/Conductive Polymer Batteries | Zhen Liu, Alexandra Prowald, Oliver Höfft, Guozhu Li, Abhishek Lahiri, Frank Endres | ChemElectroChem | 5 (17) | doi.org/10.1002/celc.201800805 |
| Interactions between Lithium, an Ionic Liquid, and Si (111) Surfaces Studied by X-ray Photoelectron Spectroscopy | Zhen Liu, Guozhu Li, Andriy Borodin, Xiaoxu Liu, Yao Li, Frank Endres | The Journal of Physical Chemistry Letters | 9 (16) | doi.org/10.1021/acs.jpclett.8b01871 |
| A battery-supercapacitor hybrid device composed of metallic zinc, a biodegradable ionic liquid electrolyte and graphite | Zhen Liu, Guozhu Li, Tong Cui, Andriy Borodin, Chantal Kuhl, Frank Endres | Journal of Solid State Electrochemistry | 22 (1) | doi.org/10.1007/s10008-017-3725-x |
| Recycling of magnetic materials | K. Kapustka*, G. Ziegmann, S. Sdrenka | Expert colloquium: Environmental protection in the 21st century, Julius Kühn Institute, Quedlinburg | ||
| The combination of NdFeB type magnetic powder with polymer as a functional material recycled from electric motors | K.Kapustka*, G. Ziegmann, S. Sdrenka, Dr. D. Klimecka-Tatar | Conference: METAL 2017, 26th International Conference on Metallurgy and Materials, Brno, CZ | ||
| Recycling of magnetic materials | K.Kapustka*, G. Ziegmann, S. Sdrenka, T. Elwert, D. Klimecka-Tatar | Conference: German Federal Environmental Foundation (DBU), 42nd Status Seminar, Lenzen (Elbe) | ||
| Micro-injection molding technology for automated cell separation | J. Bertram*, S. Sdrenka, G. Ziegmann, H. Stadler | Conference: MikroSystemTechnik Congress 2017, Munich | ||
| Tungsten - Industrial workhorse with big potential for innovative companies | Gerk, Ch.; Yan-Gerk, L.; Wesling, V.; Reiter, R. | Progress reports on materials research and materials technology | ||
| Surface and contact area effects in resistance spot welding | Kerl, H.; Wesling, V.; Wiche, H. | Progress reports on materials research and materials technology | ||
| Influencing the MSG welding process and the properties of the weld metal by filler elements on the wire surface | Treutler, K.; Schram, A.; Wesling, V. | DVS Reports Volume 320 | ||
| Use of Al-coated wire electrodes in GMAW welding to reduce alloy burn-off | Treutler, K.; Wesling, V.; Schram, A.; Hamje, J.; Zitzke, M. | Progress reports on materials research and materials technology | ||
| Additive manufacturing of fiber-reinforced aluminum components - Composite Weld Modeling | Wagner, L.; Riehemann, W.; Arlic, U.; Hebing, J.; Wesling, V.; Schram, A.; Hamje, J.; Treutler, K. | Progress reports on materials research and materials technology | ||
| Design and characterization of a SOFC stack with parallel system architecture | Wesling, V.; Hamje, J.; Dörrer, L.; Lindermeir, A. | Progress reports on materials research and materials technology | ||
| High-speed testing of wrought aluminum alloys | Wesling, V.; Wiche, H.; Kamper, S. | DVS Reports Volume 320 | ||
| Sonoelectrochemical one-pot synthesis of Pt - carbon black nanocomposite PEMFC electrocatalyst | Dionysios S. Karousos, Kostantinos I. Desdenakis, Petros M. Sakkas, Georgia Sourkouni, Bruno G. Pollet, Christos Argirusis | Ultrasonics Sonochemistry | 35 | dx.doi.org/10.1016/j.ultsonch.2016.05.023 |
| Inducing β phase crystallinity in block copolymers of vinylidene fluoride with methyl methacrylate or styrene | N. Golzari, J. Adams, S. Beuermann | Polymers | 9 | DOI: 10.3390/polym9080306 |
| Polymer electrolyte membranes prepared by pre-irradiation induced graft copolymerization on ETFE for vanadium redox flow battery applications | X. Li, A. R. dos Santos, M. Drache, X. Ke, U. Gohs, T. Turek, M. Becker, U. Kunz, S. Beuermann | Membr. Sci. | 524 | DOI: 10.1016/j.memsci.2016.10.053 |
| Ceria: Recent Results on Dopant-Induced Surface Phenomena. | Knoblauch, N., Simon, H., Dörrer, L., Uxa, D., Beschnitt, S., Fielitz, P., Wendelsdorf, J., Spitzer, K.-H., Schmücker, M., Borchardt, G. | Inorganics | 5 | DOI: 10.3390/inorganics5040076 |
| CE-XRF - Initial steps towards a non-invasive elemental sensitive detector for liquid separations | I. M. B. Tyssebotn, A. Fittschen, U. E. A. Fittschen | Electrophoresis | Accepted | DOI: 10.1002/elps.201700348 |
| Automating Human Motor Performance Ability Testing: The Case of Backward Step Detection | Goericke, C., Reinhardt, A., Krüsemann, H., Semmler Ludwig, R. | Twelfth IEEE Workshop on Practical Issues in Building Sensor Network Applications 2017 - SenseApp_Regular_Papers | ||
| Development of an automated measuring device for data acquisition of the balancing test of the German Motor Skills Test | Krüsemann, H., Semmler-Ludwig, R., Witt, M. | Proceedings: Training in Sport - Annual Conference of the dvs Section Training Science | ||
| Mechanisms of steel deoxidation of stainless steels in vacuum brazing processes | M. Unseld, C. Szepanski, A. Lindermeir, W. Maus-Friedrichs and S. Dahle | Chemical Engineering & Technology | 40(2) | 10.1002/ceat.201600282 |
| Desulfurization of biogas via dielectric barrier discharges | L. Wurlitzer, S. Dahle and W. Maus-Friedrichs | Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering (2017) | 4 | 978-3-8440-5069-1 |
| Plasma-assisted chemical liquid phase deposition - New perspectives for polymer coatings | M. Sonnenberg, J. Vega, R. Gustus, W. Maus-Friedrichs, S. Sedelmeier, H. Scheerer, J. Wieser | 25th symposium on processing and application of polymers | 978-3-939382-13-3 | |
| Silicon as a high-capacity electrode material for lithium-ion batteries: Volume expansion and lithium distribution | B. Jerliu, E. Hüger, G. Borchardt, H. Schmidt | Proceedings NSM 2017 | 4 | 978-3-8440-5069-1 |
| Isothermal differential dilatometry based on X-ray analysis applied to stress relaxation in thin ion beam sputtered Pt films | W. Gruber, C. Baehtz, T. Geue, J. Stahn, H. Schmidt | Journal of Materials Science | 52 | doi.org/10.1007/s10853-016-0458-7 |
| Thin Lithium-Silicon Films for Battery Applications Investigated by Neutron Reflectometry | F. Strauß, E. Hüger, P. Heitjans, T. Geue, J. Stahn, H. Schmidt | Energy Technology | 4 | doi.org/10.1002/ente.201600209 |
| Electrochemical lithiation of silicon electrodes: neutron reflectometry and secondary ion mass spectrometry investigations | B. Jerliu, L. Dörrer, E. Hüger, B.-K.Seidlhofer, R. Steitz, G. Borchardt, H. Schmidt | International Journal of Materials Reserach | 108 | doi.org/10.3139/146.111536 |
| Slow Lithium Transport in Metal Oxides on the Nanoscale | J. Uhlendorf, B. Ruprecht, E. Witt, C. Vinod Chandran , L. Dörrer, E. Hüger, F. Strauß, P. Heitjans, H. Schmidt | Journal of Physical Chemistry | 231 | doi.org/10.1515/zpch-2016-0939 |
| Lithium Diffusion Mechanisms in β-LiMO2(M = Al, Ga): A Combined Experimental and Theoretical Study | M. Islam, J. Uhlendorf, E. Witt, H. Schmidt, P. Heitjans, T. Bredow | Journal of Physical Chemistry C | 121 | doi.org/10.1021/acs.jpcc.7b06460 |
| Irreversible lithium storage during lithiation of amorphous silicon thin film electrodes studied by in-situ neutron reflectometry | B. Jerliu, E. Hüger, M. Horisberger, J. Stahn, H. Schmidt | Journal of Power Sources | 359 | doi.org/10.1016/j.jpowsour.2017.05.095 |
| Residual stresses in laser-welded dissimilar joints with high-manganese steels | F. Graß, V. Wesling, A. Schram W. Flügge | Progress reports on materials research and materials technology Conference proceedings 2nd NSM | Volume 4 | 978-3-8440-5069-1 |
| Influence of model parameter estimation methods and regression algorithms on curing kinetics and rheological modeling | D. Abliz , T. Artys, G. Ziegmann | Journal of Applied Polymer Science | 134 | |
| Recycling of magnetic materials | M.Sc.K.Kapustka, Prof. G. Ziegmann, Dipl.-Ing. S. Sdrenka | Technical colloquium "Environmental protection in the 21st century", Julius Kühn Institute, Quedlinburg | ||
| "The combination of NdFeB type magnetic powder with polymer as a functional material recycled from electric motors" | K. Kapustka, Prof. G. Ziegmann, Dipl.-Ing. S. Sdrenka, Dr. D. Klimecka-Tatar | Metal 2017 : 26rd International Conference on Metallurgy and Materials : conference proceedings, Brno, Česká Republika | ||
| Recycling of magnetic materials - interim report | K. Kapustka, Prof. G. Ziegmann, Dipl.-Ing. S. Sdrenka, Prof. T. Elwert, Dr. D. Klimecka-Tatar | 42 Status seminar at Lenzen Castle | ||
| Multifunctional sensor system for process monitoring in fiber composites | Tamara Florian, M. Javdanitehran, G. Ziegmann, J. Groh, M. Vossiek | Proceedings of the 2nd Lower Saxony Symposium on Materials Technology, ISBN 978-3-8440-5069-1, Shaker Verlag | ||
| Desulfurization of biogas via dielectric barrier discharges | M. Unseld, C. Szepanski, A. Lindermeir, W. Maus-Friedrichs and S. Dahle | Chemical Engineering & Technology | 40 (2) | dx.doi.org/10.1002/ceat.201600282 |
| Plasma-assisted chemical liquid phase deposition - New perspectives for polymer coatings | L. Wurlitzer, S. Dahle and W. Maus-Friedrichs | Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering | ISBN: 978-3-8440-5069-1 | |
| Coating formation in plastics processing machines: mechanisms and solution strategies | M. Sonnenberg, J. Vega, R. Gustus, W. Maus-Friedrichs, S. Sedelmeier, H. Scheerer, J. Wieser | 25th symposium on processing and application of polymers | ISBN 978-3-939382-13-3 |
| New opportunities of thermal joining by using zinc- and copper based brazing materials for modern car manufacturing | Angerhausen, M.; Reisgen, U.; Geffers, C.; Pipinikas, A.; Barthelmie, J.; Wesling, V. | |||
| Highly carbide filled composite materials for the mining and drilling industry | Gerk, Ch.; Yan-Gerk, L.; Wesling, V.; Reiter, R. | IOP Conference Series: Materials Science and Engineering | ||
| Filler elements on the wire electrode - New solutions for influencing the arc and the mechanical properties of the weld metal during GMAW welding | Wesling, V.; Schram, A.; Hamje, J.; Treutler, K. | DVS Reports Volume 327 | ||
| Influencing the arc and the mechanical properties of the weld metal in GMB-welding processes by additive elements on the wire electrode surface | Wesling, V.; Schram, A.; Müller, T.; Treutler, K. | IOP Conference Series: Materials Science and Engineering | ||
| Amending the GMA-Welding Process by thin film Coated Wire Electrodes | Wesling, V.; Schram, A.; Treutler, K. | |||
| The effect of F-doping on the conductivity of proton conductor Ba4Ca2Nb2O11 | K. Belova, S. Baskakova, Chr. Argirusis, I. Animitsa | Electrochimica Acta | 193 | dx.doi.org/10.1016/j.electacta.2016.02.052 |
| Preparation of metal-ceramic composites by sonochemical synthesis of metallic nano-particles and in-situ decoration on ceramic powders | A. Poulia, P.M. Sakkas, D.G. Kanellopoulou, G. Sourkouni, C. Legros, Chr. Argirusis | Ultrasonics Sonochemistry | 31 | dx.doi.org/10.1016/j.ultsonch.2016.01.031 |
| Copper NPs decorated titania: A novel synthesis by high energy US with a study of the photocatalytic activity under visible light | Marta Stucchi, Claudia L. Bianchi, Carlo Pirola, Giuseppina Cerrato, Sara Morandi, Christos Argirusis, Georgia Sourkouni, Alberto Naldoni, Valentino Capucci | Ultrasonics Sonochemistry | 31 | dx.doi.org/10.1016/j.ultsonch.2016.01.015 |
| Compositional effect of Cr contamination susceptibility of La9.83Si6-x-yAlxFeyO26-d apatite type SOFC electrolytes in contact with CROFER 22 APU | P. K. Pandis, E. Xenogiannopoulou, P. M. Sakkas, G. Sourkouni, Ch. Argirusis and V. N. Stathopoulos | RSC Advances | 6 | DOI: 10.1039/c6ra02025a |
| Polymer electrolyte membranes for high and low temperature fuel cells from radiation-induced graft copolymerization | X. Li, M. Drache, U. Gohs, S. Beuermann | Chem. Ing. Tech. | 88 | DOI: 10.1002/cite.201500153 |
| Low temperature ring-opening polymerization of diglycolide using organocatlysts with PEG as macroinitiator | V. Mawamba Kemo, C. Schmidt, Y. Zhang, S. Beuermann | Macromol. Chem. Phys. | 217 | DOI:10.1002/macp.201500491 |
| Oxygen exchange at gas/oxide interfaces: How the apparent activation energy of the surface exchange coefficient depends on the kinetic regime. | Fielitz, P.; Borchardt, G. | Phys. Chem. Chem. Phys. | 18 | DOI: 10.1039/c6cp02131j |
| Mechanism-based strategies for the prevention of deposit formation in plastics processing machines and tools | S. Dahle, R. Siemann, L. Wurlitzer and W. Maus-Friedrichs | Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering | 3 | 978-3-8440-4809-4 |
| Conversion of extremely lean fuel mixtures using DBE plasmas | C. Kunz, M. Marschewski, W. Maus-Friedrichs, S. Schöler, U. Holländer and K. Möhwald | 11th International Conference Soldering 2016 | DVS Reports 325 | 978-3-945023-64-8 |
| Micro structure and strain relaxation in thin nanocrystalline platinum films produced via different sputtering techniques | W. Gruber, C. Baehtz, M. Horisberger, I. Ratschinski, H. Schmidt | Applied Surface Science | 368 | doi.org/10.1016/j.apsusc.2016.02.015 |
| Short Range Atomic Migration in Amorphous Silicon | F. Strauß, B. Jerliu, T. Geue, J. Stahn, H. Schmidt | Journal of Applied Physics | 119 | doi.org/10.1063/1.4948333 |
| Lithiation of Crystalline Silicon As Analyzed by Operando Neutron Reflectivity | B.-K. Seidlhofer, B. Jerliu, M. Trapp, E. Hüger, S. Risse, R. Cubitt, H. Schmidt, R. Steitz, M. Ballauff | ACS Nano | 10 | doi.org/10.1021/acsnano.6b02032 |
| Investigation of the influence of the filler metal on dissimilar joints with high manganese steels during laser beam welding | F. Graß, V. Wesling, A. Schram W. Flügge, M. Höfemann | DVS Reports DVS Congress Large Welding Conference | Volume 327 | 978-3-945023-74-7 |
| Correlation of the Dielectric Properties of an Epoxy Resin with the Degree of Cure | A. Eggers, D. Abliz, G. Ziegmann, D. Meiners | Proceedings of the 17th European Conference on Composite Materials - ECCM17 in Munich | ||
| Correlation of the Dielectric Properties of an Epoxy Resin with the Degree of Cure | A. Eggers, D. Abliz, G. Ziegmann, D. Meiners | Proceedings of the SAMPE EUROPE Conference 2016 in Liège (Belgium) | ||
| An iterative approach for isothermal curing kinetics modeling of an epoxy resin system | Javdanitehran, M., Berg, D.C., Duemich, E., Ziegmann, G. | Thermochimica Acta | Volume 623 | |
| Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites | XY Tian, TF Liu, QR Wang, D. Abliz, DC Li, G. Ziegmann | Journal of Cleaner Production | 142 | |
| Flow and filtration behavior of boehmite nanoparticle-filled matrix systems in RTM process | D. Abliz, B. Finke, D. C. Berg, C. Schilde, D. Meiners, G. Ziegmann | 13th International Conference on Flow Processes in Composite Materials (FPCM 13) | ||
| Effect of embedded printed circuit board (PCB) sensors on the mechanical behavior of glass fiber-reinforced polymer (GFRP) structures | Mehdi Javdanitehran, R. Hoffmann, J. Groh, M. Vossiek, G. Ziegmann | Smart Materials and Structures | Volume 25 Number 6 | |
| Design and fabrication of plastic-based microsensors | Tamara Florian, A. Dietzel, G. Ziegmann | Smart Systems and Structures, DeGruyter, ISBN 978-3-11-046713-0 | ||
| Influence of low-pressure plasma treatment on the adhesion strength of vacuum-produced metal-plastic composites using the example of polyamide 46 and polyamide 6 | Tamara Florian, T. Artys, G. P. Brunotte, J. Rami, G. Ziegmann | Micro-Nano-Integration, 86th GMM Technical Report; VDE Verlag, Berlin, Offenbach; ISBN 978-3-8007-4278-3 | ||
| Multifunctional Structural Elements by Micro Injection Molding Technology | Gerhard Ziegmann, T. Florian | Polymer Materials and Engineering, Plenary Lecture | ||
| Development, characterization and application of thermoplastic bonded solder molded parts | Tamara Florian, St. Krichberg, U. Holländer, G. Ziegmann | Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering | ISBN 987-3-8440-4809-4 | |
| Design and manufacture of plastic-based microsensors | Tamara Florian, G. Ziegmann | Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering | ISBN 987-3-8440-4809-4 | |
| Optimization of flame retardant content with respect to mechanical properties of natural fiber polymer composites: Case study of Polypropylene / Flax / Aluminum trihydroxide | A. El-Sabbagh, L. Steuernagel, D. Meiners, G. Ziegmann, O. Toepfer | Polymer Composites | Volume 37 Issue 11 | |
| Conversion of extremely lean fuel mixtures using DBE plasmas | S. Dahle, R. Siemann, L. Wurlitzer and W. Maus-Friedrichs | Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering | ISBN: 978-3-8440-4809-4 | |
| Investigation of the influence of filler metal on dissimilar joints with high manganese steels | Graß, F.; Schram, A.; Wesling, V. | DVS Reports Volume 314 |
| The structure of a coordination polymer constructed of manganese(II) biphenyl-4,4'-dicarboxylate | A. Smeyanov, M. Nieger, R. Gustus, W. Maus-Friedrichs and A. Schmidt | Z. Nature Research | doi.org/10.1515/znb-2015-0120 | |
| Chemical improvement of surfaces. Part 4: Significantly Enhanced Hydrophobicity of Wood by Covalent Modification with p-Sily-functionalized Benzoates | C. Kaldun, S. Dahle, W. Maus-Friedrichs and D. E. Kaufmann | Wood research | 10.1515/hf-2015-0036 | |
| Surface controlled reduction kinetics of nominally undoped polycrystalline CeO2. | Knoblauch, N.; Dörrer, L.; Fielitz, P.; Schmücker, M.; Borchardt, G. | Phys. Chem. Phys. Chem. | 17 | DOI: 10.1039/c4cp05742b |
| Characterization of PMMA/ATH layers realised by means of atmospheric pressure plasma powder deposition | L. Wallenhorst, S. Dahle, M. Vovk, L. Wurlitzer, L. Loewenthal, N. Mainusch, C. Gerhard and W. Viöl | Condensed Matter Physics | 10.1155/2015/980482 | |
| Homogeneous coatings of aerosol nanoparticles in a cold plasma at atmospheric pressure | M. Sonnenberg, R. Gustus, L. Wegewitz, W. Maus-Friedrichs, S. Sedelmeier, J. Wieser, J. Vega, H. Scheerer | 24th symposium on processing and application of polymers | 978-3-939382-12-6 | |
| Mechanism-based strategies for the prevention of deposit formation in plastics processing machines and tools | M. Sonnenberg, R. Gustus, L. Wegewitz, W. Maus-Friedrichs, S. Sedelmeier, J. Wieser, J. Vega, H. Scheerer | 24th symposium on processing and application of polymers | ISBN 978-3-939382-12-6 | |
| Surface decoration of commercial micro-sized TiO2 by means of high energy ultrasound: A way to enhance is photocatalytic activity under visible light | M. Stucchi, C.L.Bianchi, C.Pirola, S.Vitali, G.Cerrato, S.Morandi, C. Argirusis, G.Sourkouni, P.M.Sakkas, V.Capucci | Applied Catalysis B: Environmental | 178 | dx.doi.org/10.1016/j.apcatb.2014.10.004 |
| Efficient new process for the desulfurization of mixtures of air and hydrogen sulfide via a dielectric barrier discharge plasma | P. Post, A. P. Weber, S. Dahle and W. Maus-Friedrichs | Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering | 1 | 978-3-8440-3403-5 |
| Homogeneous coatings of aerosol nanoparticles in a cold plasma at atmospheric pressure | P. Post, A. P. Weber, S. Dahle and W. Maus-Friedrichs | Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering | ISBN: 978-3-8440-3403-5 | |
| Monolayer deposition of Bisphenol A Polycarbonate on Au(111) | R. Gustus, L. Wegewitz, S. Sedelmeier, O. Höfft, J. Wieser, M. Rehahn, F. Endres and W. Maus-Friedrichs | J. Phys. Chem. C | 119 (1) | 10.1021/jp506627d |
| Monolayer deposition of bisphenol A polycarbonate on Au(111) | R. Gustus, L. Wegewitz, S. Sedelmeier, O. Höfft, J. Wieser, M. Rehahn, F. Endres and W. Maus-Friedrichs | J. Phys. Chem. C | 119 (1) | pubs.acs.org/doi/abs/10.1021%2Fjp506627d |
| Mechanisms of adhesion and coating formation at polymer/metal interfaces | R. Gustus, O. Höfft, W. Maus-Friedrichs, M. Rehahn, S. Sedelmeier, L. Wegewitz, J. Wieser | Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering | ISBN: 978-3-8440-3403-5 | |
| Gd- and Pr-based double perovskite cobaltites as oxygen electrodes for proton ceramic fuel cells and electrolyser cells | Ragnar Strandbakke, Vladimir A. Cherepanov, Andrey Yu. Zuev, Dmitry S. Tsvetkov, Christos Argirusis, Georgia Sourkouni, Stephan Prünte, Truls Norby | Solid State Ionics | 278 | dx.doi.org/10.1016/j.ssi.2015.05.014 |
| Colloidal Stability and Magnetic Field-Induced Ordering of Mangetorheological Fluids Studied with a Quartz Crystal Microbalance | Rodriques-Lopez, J.; Castro, P.; de Vicente, J.; Johannsmann, D.; Elvira, L; Morillas, J.R.; de Espinosa, F.M. | Sensors | 15, (12), | |
| The structure of a coordination polymer constructed of manganese(II) biphenyl-4,4'-dicarboxylate | S. Dahle | AIP Advances 5 | 107234 | DOI: 10.1063/1.4935102 |
| Generation of thin functional layers by means of plasma-enhanced chemical vapor deposition | S. Dahle, C. Kunz, M. Sonnenberg and W. Maus-Friedrichs | Fortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering | ISBN:978-3-8440-3403-5 | |
| Gas purification by plasma-oxidation of a rotating sacrificial electrode | S. Dahle, J. Hirschberg, W. Viöl and W. Maus-Friedrichs | Plasma Sources Sci. Technol. | 24 | 10.1088/0963-0252/24/3/035021 |
| Gas purification by plasma-oxidation of a rotating sacrificial electrode | S. Dahle, J. Hirschberg, W. Viöl and W. Maus-Friedrichs | Plasma Sources Sci. Technol | 24 | dx.doi.org/10.1088/0963-0252/24/3/035021 |
| Crystal Phase Transformation of ∝ into β phase poly(vinylidene fluoride) via particle formation caused by Rapid Expansion of Supercritical Solutions | S. Wolff, F. Jirasek, S. Beuermann, M. Türk | RSC Adv. | 5 | DOI: 10.1039/C5RA12142F |
| Latex Films with In-Plane Composition Gradients Caused b Lateral Drying | Schulz, M.; Römermann, H.; Pohl, K.; Chindawong, C.; Johannsmann, D. | Soft Materials | 13, (3) | |
| Personality traits influence the choice of sporting activities | Semmler-Ludwig, R. & Paetz, F. | LSB-Magazine | Issue 07 | |
| Temperature-programmed C18O2 SSITKA for powders of fast oxide-ion conductors: Estimation of oxygen self-diffusion coefficients | V. Sadykov, E. Sadovskaya, A. Bobina, T. Kharlamova, N. Uvarov, A. Ulikhin, Ch. Argirusis, G. Sourkouni, V. Stathopoulos | Solid State Ionics | 271 | dx.doi.org/10.1016/j.ssi.2014.11.004 |
| High-speed tensile tests on high-strength dual-phase steels | W. Flügge, M. Höfemann, R. Koreng, F. Graß, U. Schultheiß | Proceedings 1st NSM | ||
| SIMS Study on Self-Diffusion of Pt in Thin Nano-Crystalline Films | W. Gruber, J. Rahn, F. Strauss, L. Dörrer, H. Schmidt | Defect and Diffusion Forum | 363 | doi.org/10.4028/www.scientific.net/DDF.363.219 |
| Novel concept of polymer electrolyte membranes for high-temperature fuel cells based on ETFE grafted with neutral acrylic monomers | X. Li, M. Drache, U. Gohs, S. Beuermann | J. Membr. Sci. | 495 | DOI:10.1016/j.memsci.2015.07.056 |
Dissertations
Matthias Dickert, Dipl.-Ing. "Influence of binders on the production of fiber-reinforced plastic composites" Prof. Dr.-Ing. Gerhard Ziegmann
Nowfal A Abdulrazzag Al-Hamdany "Texture and Stress Characterization of a Copper Tube by Neutron, Synchrotron and Electron Diffraction" apl. prof. dr. rer. nat. dr.-Ing. habil. Heinz-Günter Brokmeier
Lienhard Wegewitz, M. Sc. "Plasma-induced modification of self-organizing polystyrene spheres by means of dielectrically impeded discharge" apl. Prof. Dr. Wolfgang Maus-Friedrichs
Ulrich Raab, Dipl.-Ing. "Investigations into orbital friction welding as an alternative manufacturing process for titanium blisks in comparison with linear friction welding" Prof. Dr.-Ing. habil. Lothar Wagner
René Gustus, M.Sc. "Interaction of polymer melts and ionic liquids with solid surfaces" Prof. Dr. Frank Endres
Marcel Marschewski, Dipl.-Phys. "Electron spectroscopic investigations on organic surfaces" apl. Prof. Dr. Wolfgang Maus-Friedrichs
Mark Olschewski, M. Sc. "Photoelectron spectroscopic investigation of the formation of passive layers of ionic liquids on alkali metal surfaces" Prof. Dr. Frank Endres
Ahmed Elsabbagh "Processing and optimizing the mechanical and physical properties of natural fi bre reinforced polypropylene composites" Prof. Dr.-Ing.
Mozhgan Gholamikermanshahi "Effects of Grain Refi nement on Mechanical Properties, Electrical Conductivity and Fatigue Performance of CuNi3Si1Mg" Prof. Dr.-Ing.
Dilimulati Abulizi "Functionalization of fiber composites with nanoparticle-modified resin systems" Prof. Dr.-Ing.
Florian Strauß, Dipl.-Phys. "Investigation of amorphous silicon with regard to self-diffusion and lithium permeation" apl. Prof. Dr. Harald Schmidt
Amna Ramzy, M. Sc. "Recycling Aspects of Natural Fiber Reinforced Polypropylene Composites" Prof. Dr.-Ing. Gerhard Ziegmann
Maria Sonnenberg, M.Sc. "Interaction of polycarbonate melt with tool surfaces as a cause of coating formation in plastics processing machines" apl. Prof. Dr. Wolfgang Maus-Friedrichs
Cornelia Strauß, M.Sc. "Mechanisms of surface deoxidation of stainless steels during vacuum brazing" apl. Prof. Dr. Wolfgang Maus-Friedrichs
Marina Unseld, M.Sc. "Plasma-based exhaust air purification of sulphurous pollutants and ammonia - the path from laboratory scale to application under operating conditions" apl. Prof. Dr. Wolfgang Maus-Friedrichs
Lisa Wurlitzer, M.Sc. "Spectroscopic and microscopic investigations on the formation of silicon oxide layers from a two-stage plasma process, apl. Prof. Dr. Wolfgang Maus-Friedrichs
Woramon Pangboonyanon, M.Sc. "A Study of Contactless Localized Positioning of Carbon Fibres Using Electrical and Magnetic Fields for Reinforced Plastics Applications", Prof. Dr.-Ing.
Amke Eggers, M.Sc. "Characterization, modelling and prediction of the viscoelastic properties of selected thermosets and fibre composites using the example of the creep test" Prof. Dr.-Ing.
Sven Meyer, Dr. rer. nat. "Development and evaluation of process approaches for the generation of thermal and electrical energy in regenerative thermal exhaust gas cleaning systems" Prof. Otto Carlowitz
Sebastian van Cayzeele, Dipl.-Wirtschaftsing. "Formulation and evaluation of scenario-based business model options - illustrative energy industry case study" Prof. Wolfgang Pfau
Haucke-Frederik Hartmann, Dipl.-Ing. "Component-adapted process control and cooling concepts for mold hardening in large-scale automotive production" Prof. Dr.-Ing.
Lukas Lau, Dipl.-Ing. "Use of an edge zone carburized tungsten fusion carbide for welding hardfacing of highly wear-stressed surfaces" Prof. Dr.-Ing.
Christian Heet, Dipl.-Ing. "High-temperature jet wear investigations on single-phase and multiphase metallic materials" Prof. Dr.-Ing. Volker Wesling
Alexander Petsch, Dipl.-Ing. "Investigations of infiltration materials based on fused tungsten carbide for use in drill heads for oil and gas wells" Prof. Dr.-Ing. Volker Wesling
Abed Al Rahman Al Masri, M.Eng. "Investigations into the ultrasonic welding of highly filled graphite compounds with metals for use in PEM fuel cells" Prof. Dr.-Ing.
Jan Barthelmie, Dipl.-Ing. "Investigation of liquid metal embrittlement during resistance spot welding of high manganese steels" Prof. Dr.-Ing. Volker Wesling
Hagen Kerl, Dipl.-Ing. "A contribution to increasing the service life of electrode caps during resistance spot welding" Prof. Dr.-Ing. Volker Wesling
Friederike Graß, Dipl.-Ing. "Contribution to the processing of high-manganese TWIP steels in mixed steel joints using laser beam welding", Prof. Dr.-Ing. Volker Wesling
Kai Treutler, Dipl.-Ing. "Welding of lightweight frame constructions - functional material selection and filler material modification" Prof. Dr.-Ing. Volker Wesling
Swenja Kamper, M.Sc. "Iron-based inter-metallic hard alloys for wear protection using the example of single-screw extruders" Prof. Dr.-Ing.
Torben Buttler, M.Sc. "Wear investigations on the upper web edges of thin-film-coated single-screw extruders when processing unfilled polymers", Prof. Dr.-Ing.